26" Craftsman Trac-Drive snowblower that now has a newer 8hp engine with Low hours. Has 6 forward plus 2 reverse speeds and it starts on the first pull and runs and moves like new again. Tread on the tracks is about 90%, and I just installed a new friction drive wheel and new bronze axle bushings. Also installed a new fuel line and fuel cut-off as well as a new throttle and governor controller. The scraper blade has no wear, and the front skids are new. The Impeller bushing and the auger bushings are tight. I also installed a new set of Gates Power-rated belts. This machine is a TANK with an all-gear main drive, and it will climb most any incline all while tossing the snow 15-20ft with ease. I Changed the oil and properly cleaned and lubricated everything including the outer drive chains so it's ready to go! Has minor rust spots here and there but the paint is still 95%. Track drive units can cost well over $2,600 new but you can get this one for 1/3 that price. Needs nothing. Come take it for a test drive. $750
Do NOT contact this poster with unsolicited services or offers.